fdsa

fdsa

Products

D400 and D600 – BUC/ BDC/ LNB driver units

The D400 and D600 Driver units are flexible and configurable to customer specific requirements.
They are designed to supply DC power and/or a reference frequency to a remote mounted Block
DownConverter (BDC), Low Noise Block (LNB) or Block UpConverter (BUC).

Download the full technical specifications

The D400 and D600 Driver units are flexible and configurable to customer specific requirements.
They are designed to supply DC power and/or a reference frequency to a remote mounted Block
DownConverter (BDC), Low Noise Block (LNB) or Block UpConverter (BUC). These units are ideal in
the situation where the connecting modulator cannot supply a suitable external DC supply or when
the modulator reference frequency is either unavailable or has insufficient stability for the application.
The Driver units are 19 inch rack mounted and are powered from a wide input range AC supply.
The D400 unit is designed for use with a BDC or LNB. These units can supply up to 24VDC at
typically 500mA and can incorporate a locking reference frequency of typically 10MHz. The supply to
the BDC/LNB is a composite of DC, reference and the received L-Band signal. The output of the
D400 unit is the received L-Band signal.
The D600 units are designed for use with a BUC. These units can supply up to 24VDC at typically
500mA and can incorporate a locking reference frequency of typically 10MHz. The input of the D600
unit is the L-Band signal to be transmitted. The supply to the BUC is a composite of DC, reference
and the L-Band signal to be transmitted.

Peak Features

  • Optional multiple L-Band inputs on the D400 or outputs on the D600
  • Optional high stability reference system
  • Optional DC drive of typically 17-24VDC at 500mA (or higher)
  • Optional redundant power supplies with dual mains input
  • Full alarm monitoring